Contract manufacturing · Machining · Sheet metal · FabricationDemonstration brand · illustrative data · nothing is sent
FORGEWORKS

Built to meet the specification.

Contract machining, sheet-metal and fabrication work quoted from your drawing. Choose a process, check the materials, then send a structured request for quotation.

A vertical machining centre milling an aluminium block clamped in a vice, coolant lines and chips around the cutter
Operation3-axis millingWorkpieceAluminium block in a machine viceIllustrative stock photograph, not this fictional company's workshop
Process families
4Machining · Sheet metal · Fabrication · Finishing
Processes indexed
6Each with materials and specification inputs
Catalogue components
84 fixed · 4 configurable
Quotation basis
Your drawingNumber + revision, reviewed before pricing
Certifications
None claimedDemonstration brand. See §05

From drawing to finished component.

Each process lists the materials it is quoted in, the inputs needed to price it, and typical applications. No machine list or tolerance figures are published. Your drawing sets the requirement.

6 of 6
  1. P-01

    CNC turning

    Machining

    Round parts turned from bar between the chuck and tailstock.

    Materials
    • Aluminium
    • Mild steel
    • Stainless steel
    • Brass
    • Engineering plastic
    Specification inputsDiameters · lengths · thread form · surface finish
    ApplicationsShafts, bushes, spacers, pins, threaded spigots
  2. P-02

    CNC milling

    Machining

    Prismatic parts: pockets, profiles, drilled and tapped patterns.

    Materials
    • Aluminium
    • Mild steel
    • Stainless steel
    • Engineering plastic
    Specification inputsOverall size · datums · hole patterns · flatness
    ApplicationsHousings, manifolds, brackets, fixture plates
  3. P-03

    Laser cutting

    Sheet metal

    Flat profiles cut from sheet to a 2D outline.

    Materials
    • Aluminium
    • Mild steel
    • Stainless steel
    Specification inputsFlat pattern · sheet thickness · grain direction
    ApplicationsBlanks for forming, gussets, panels, plates
  4. P-04

    Press brake forming

    Sheet metal

    Bends added to cut blanks to make brackets, channels and enclosures.

    Materials
    • Aluminium
    • Mild steel
    • Stainless steel
    Specification inputsBend lines · inside radius · flange lengths · angles
    ApplicationsBrackets, channels, covers, enclosure bodies
  5. P-05

    Welding & fabrication

    Fabrication

    Cut and formed parts joined into frames and assemblies.

    Materials
    • Mild steel
    • Stainless steel
    Specification inputsWeld symbols · joint type · distortion limits · finish
    ApplicationsFrames, guards, stands, brackets, chassis parts
  6. P-06

    Surface finishing

    Finishing

    Deburring, grinding and preparation before coating or assembly.

    Materials
    • Aluminium
    • Mild steel
    • Stainless steel
    • Brass
    Specification inputsFinish callout · masked faces · coating system
    ApplicationsMachined and fabricated parts before dispatch

Illustrative capability information for a fictional manufacturer. Achievable tolerances, sizes and lead times are confirmed against each drawing at contract review.

Component register.

Fixed catalogue items have one set of sample drawing values. Configurable products accept values within stated ranges, and invalid combinations are blocked. All parts and dimensions are illustrative sample data, not stocked products.

FW-BR-042 · rev B

Angle mounting bracket

Fixed catalogue item
80 mm60 mmSIDE · 90° BENDFW-BR-042REV BSCALE NTSUNITS mmSAMPLE · NOT FOR MANUFACTURE
Sample drawing data · Aluminium 6082-T6
MaterialAluminium 6082-T6
Process routeLaser cutting + press brake forming
Width80 mm
Height60 mm
Depth40 mm
Thickness3 mm
Fixing holes4 × Ø6.5 mm

Single 90° bend. Holes pierced in the flat before forming.

Where the parts end up.

Sectors whose parts fit the processes indexed in §02. The listed parts show the kind of work quoted. They are not customer references.

Aerial view of a tractor cultivating a field, dust trailing behind it
01 / 05

Agricultural machinery

Wear parts and brackets for equipment that works in mud, dust and long seasons.

Typical parts
Mounting brackets · Pivot bushes · Guards and covers
Stainless steel process pipework and a blue pump motor in a processing plant
02 / 05

Food & beverage process equipment

Stainless brackets, clamps and spacers for process lines and frames.

Typical parts
Pipe clamp halves · Stainless spacers · Frame brackets
Orange industrial robot arms working along an automated production line
03 / 05

Automation & packaging machinery

Fixture plates, guards and machined details for cells and lines.

Typical parts
Fixture plates · Sensor brackets · Locating pins
Rows of machined steel sleeves standing on end, bores facing up
04 / 05

Pumps, valves & fluid handling

Turned sleeves, bushes and flange blanks made to the customer's drawing.

Typical parts
Sleeves and bushes · Flange blanks · Spacers
A site worker in orange high-visibility clothing guiding concrete down a steel chute
05 / 05

Construction & site equipment

Heavier fabricated parts and plates for equipment used on site.

Typical parts
Base plates · Chute and hopper parts · Welded frames

How a job moves through the shop.

Seven routing stages from contract review to dispatch. Inspection gates are marked ◆. The records listed are what the process produces. Which of them you receive is agreed in the RFQ.

R10 · Production stage

Contract review

The drawing, revision, material, quantity, tolerances and finish are checked against what was asked for. Questions go back to the buyer before a price is given.

Record producedReviewed drawing list and open questions

How FORGEWORKS works

01

The drawing comes first

Every quote starts from a numbered, revised drawing. If something on it is unclear, we ask before we price.

02

No capability we can't show

No machine list, tolerance figures or certificates are published here, because none can be verified for a demonstration brand.

03

Records you can ask for

The routing produces a record at every gate. Say in the RFQ which of them you want delivered with the parts.

Hands measuring a machined steel part with a digital caliper
Dimensional check with a caliper · illustrative photograph

Document register

DocumentIssuedFormatStatus
Delivery noteEvery orderPaper / PDFStandard
First-off measurement sheetOn request at RFQPDFMust be requested
Material certificate (as supplied by the mill)On request at RFQPDF copyMust be requested
Certificate of conformityOn request at RFQPDFMust be requested
Final inspection recordOn request at RFQPDF / CSVMust be requested

Sample examples of these records can be downloaded in §06.

A production floor of automatic machines with blue guarding, parts bins and yellow walkway lines
Production floor · illustrative photograph

Download library.

Plain text and CSV files, generated in your browser from this page's data. They contain no macros or scripts.

FileTypeVersionDateSizeDownload
FW-RFQ-Checklist_v1.2.txtRFQ checklist. What to include so a quote can be prepared without back-and-forth.TXTv1.2505 B
FW-Drawing-Requirements_v2.0.txtDrawing requirements. Title block, revision, datums and the callouts we need on a drawing.TXTv2.0520 B
FW-Material-Reference_rev-C.csvMaterial reference. The material families on this page and the processes each one is quoted for.CSVrev C467 B
FW-Process-Index_rev-B.csvProcess index. The §02 process table as a spreadsheet: materials, inputs and applications.CSVrev B1.2 KB
FW-Inspection-Record-Template_v1.0.csvInspection record template. Blank first-off / final inspection layout for agreeing a report format.CSVv1.0138 B
FW-Finishing-Notes_rev-A.txtFinishing notes. How finishes, masking and outside coatings are stated on a quote.TXTrev A387 B

Procurement questions

Which tolerances can you hold?

This page does not publish machine capability figures. Tolerances are taken from your drawing and confirmed or questioned at contract review, before a price is given.

Can I upload drawings here?

Not on this demo site. There is no secure file storage behind the form, so it does not take uploads. Quote the drawing number and revision. A live supplier would ask for the files through a secure channel.

Do you hold ISO 9001 or other certification?

No certification is claimed by this demonstration brand. Always ask a real supplier for current certificates and check their scope.

What is the difference between fixed and configurable parts?

Fixed catalogue items have one set of sample drawing values. Configurable parts let you pick values within stated ranges, and invalid combinations are blocked before they reach the RFQ.

Four stages to a quotable request.

Identify what to quote, specify it, set the timeline and delivery, then add your company details. Your progress is saved in this browser only. Nothing is transmitted.

Stage 1: Identify the product or process

Identify the product or process

RFQ list · 0 lines

No lines yet. Add a process from §02 or a component from §03, or describe your own part below.

Stage 2: Specification and quantity

Specification and quantity

Drawings and models: this demo has no secure file storage, so it does not take uploads. Give the drawing number and revision above. A live supplier would ask for the files through a secure channel.

Stage 3: Timeline and delivery

Timeline and delivery

Stage 4: Company and contact details

Company and contact details

Fields marked * are required. The draft is stored in this browser only. Nothing is sent.